Makita 18V LXT SDS+ Hammer + DX07 Filter DHR243RTWJ

Makita DHR243 SDS+ Rotary Hammer Drill, Changeable 3 Jaw Chuck and Makita DX07 HEPA Filter Dust Collector / Extractor.

 

 

The Makita DHR242 is a high-performance cordless combination hammer which accepts SDS+ drill bits, and features a removeable/detachable chuck to be replaced with a standard ‘twist’ 3 jaw chuck to accept standard drill bits. This rotary hammer is featuring efficient Brushless DC motor provides higher productivity than model DHR202. The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are jointed with vibration absorbing cushion rubbers. It is fitted with a variable speed trigger, electronic brake and 40 chisel lock positions. The brushless DC motor reduces energy loss for higher productivity.  

  

Features and benefits:  

Comes with standard 3 jaw chuck 

Strong effective performance combined with ergonomic design  

Centre of gravity closer to the vibration absorbing handle gives unrivaled tool balance, which in turn reduces the operators fatigue and gives a more productive working day  

Able to drill in concrete faster than 24V Cordless Combination Hammer model BHR200  

One touch slide chuck for SDS-plus bit Easy-to-grip handle Ergonomically designed to give maximum power thrust  

Provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip  

3 mode operation: Rotation + Hammering, Hammering only & Rotation only  

The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are jointed with vibration absorbing cushion rubbers  

Brushless DC motor reduces energy loss by 30% giving longer run times between battery charges  

Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact  

  

Specification:  

Voltage – 18v  

Weight – 3.3kg  

Impact energy – 2.0J  

Blows per min – 0-4700 BPM  

Max drilling in concrete – 24mm  

Max drilling in wood – 27mm  

Max drilling in steel – 13mm 

 

The Makita DX07 is a portable, cordless dust extractor attachment for use with the Makita DHR243 SDS+ Rotary Hammer SDS. No additional battery required, just simply slide the DX07 onto the bottom of the DHR242 and its ready to use. The DX07 takes its power from the DHR242, using minimal power and doesn’t drain the battery more. This tool features auto take of which means there is no switch to turn it on or off, the DX07 auto starts up when the trigger of the DHR242 is pressed. Designed with a HEPA filter which captures and traps almost all particles with an affection rate of 99.75%! 

 

Features and benefits: 

HEPA filter built in 

Easy to remove and empty dust box 

Slide adjustment to fit all sized drill bits 

All new dust dial that removes excess dust from the filter to maintain vacuum efficiency and performance 

Transparent dust box to see when it needs emptying 

Depth gauge 

 

EAN: DHR243RTWJ

GTIN: 0088381866347