MAKITA DLX2221ST 18V LXT TWIN KIT 2 X 5.0AH DHP483 DTD155

£281.99 £234.99
SKU
DLX2221ST

ECA Expert Says...

Brushless twin kit with 2 x 18v 5.0Ah batteries

MAKITA DLX2221ST 18V BRUSHLESS TWIN KIT DHP483 COMBI + DTD155 IMPACT DRIVER INC 2X 5.0AH BATTS & DC18SD CHARGER IN A CARRY CASE

The Makita DLX2221ST is a cordless 18 volt compact twin kit which contains the DHP483 Combi Drill and DTD155 Impact Driver

MAKITA DHP483ZJ 18V LXT BRUSHLESS 2-SPEED COMBI DRILL
The Makita DHP483 has been developed for light duty tasks, with compact body and great endurance thanks to its brushless motor.
At only 176mm long and 1.6 Kg with a 3Ah+ battery attached, this drill can be used above your head or in tight spaces with minimal fatigue.

FEATURES:

Variable 2-speed, reversible, Makita Brushless Motor
Brushless motor for more power and longer runtimes - no brushes to replace therefore easier to maintain
Single sleeve keyless chuck allows for easy bit installation/removal by one hand
Incorporates Makita's new battery protection system that provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life
Extreme protection technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
20 clutch settings deliver up to 40 Nm of torque
All metal gears for more efficient power transmission
Ultra-compact design (only 176mm long)
Twin led jobs light with pre-glow and after-glow functions
Ergonomically designed high comfort grip

SPECIFICATIONS

Voltage: 18v
Soft Application Max Torque (Nm): 23
Hard Application Max Torque (Nm): 40
Torque Settings: 20 + Drill
Brake Type: Electric
No. of Gears: 2
LED Job Light: Yes / Twin / Pre-glow
Battery Capacity Indicator: No
Battery Compatibility: 18v Lithium-Ion (LXT)
Rotation: Forward / Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM) High: 0-1,700
No Load Speed (RPM) Med: N/A
No Load Speed (RPM) Low: 0-500
Chuck Type: 3-Jaw / Single Sleeve Keyless
Chuck Capacity (mm): 1.5 - 13
Screw Capacity: Machine Screw (mm): 6
Screw Capacity: Wood Screw (mm): 6 x 75
Drill Capacity: Concrete (mm): 13
Drill Capacity: Metal (mm): 13
Drill Capacity: Wood (mm): 36
Impact Rate (BPM) High: 0-25500
Impact Rate (BPM) Med: N/A
Impact Rate (BPM) Low: 0-7500
Overall Length (mm): 176
Net Weight (Approx. Kg) with 1.5/2Ah Batt: 1.3
Net Weight (Approx. Kg) with 3/4/5Ah Batt: 1.6
Brushless Motor: Yes

MAKITA DTD155Z LXT 18V LI-ION BRUSHLESS CORDLESS IMPACT DRIVER

The Makita DTD155 is a cordless, Brushless Impact Driver.
It features Makita's new impact mode, "A-Mode" aka "Assist Mode" which helps to eliminate "screw cam-out" and "cross threading“ by driving at low speed until the start of tightening.

FEATURES:

3 operating modes allow a wide range of applications: 2 speed levels + "A Mode"
"Assist Mode": Assisted screwing with push button, soft & slow start -> automatic acceleration -> tightening with maximum speed
BL Motor without carbon brushes: no maintenance and low energy consumption, therefore longer battery life
Enhanced moisture and dust protection with the XPT system (eXtreme Protection Technology)
Ergonomic design for optimum hand control
Ergonomic handle with soft coating for high working comfort
One-touch bit installation with 1/4" hex chuck
Powerful double LED lighting
Electric brake
Variable speed control by trigger
Forward and reverse rotation

SPECIFICATIONS:

Voltage: 18v
Max Torque (Nm): 140
Brake Type: Electric
LED Job Light: Yes / Twin
Battery Capacity Indicator: No
Battery Compatibility: 18v Lithium-Ion (LXT)
Rotation: Forward & Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM): H: 0-3000 S: 0-1300
Machine Screw Capacity: M4-M8
Standard Bolt Capacity: M5-M14
High Tensile Bolt Capacity: M5-M12
Coarse Thread Length Capacity (mm): TBC
Max. Impacts Per Minute (ipm): H: 0-3900 S: 0-1600
Driving Shank: 1/4" Hex
Overall Length (mm): 135
Net Weight (Kg with 1.5/2Ah Battery): 1.2
Net Weight (Kg with 3/4/5Ah Battery): 1.5
Brushless Motor: Yes

Delivery Methods

We use Parcelforce for the majority of our deliveries. We aim to despatch 'IN STOCK' orders from our Coventry branch by 4pm using Pareclforce Express 24 delivery service which means your order should arrive next working day. Please note if your product is in stock at one of our other branches (Not Coventry) then these orders may take 2-5 days for delivery. Delivery is FREE on orders over 75.00 ex VAT.

We currently only deliver to Mainland UK, excluding Highands and Islands. A signature is required for all deliveries.

Where an item has an extended delivery time, this will be clear on the individual product page Parcelforce will let you know either by SMS or email that they have your parcel and will also give you an approximate time of delivery. Not going to be in? No problem. You will be able to reply to the Parcelforce notification where you can change delivery date, deliver to a neighbour or take to your local post office for collection. Want to track your order? - Please use this link https://www.parcelforce.com/track-trace As soon as your order is dispatched we will notify you by e-mail. If it is not possible to dispatch your order within the allotted time period or if for any reason it is not possible to fulfil your order we will inform you by email.

Makita tools come with a standard 12 month warranty from date of purchase. Makita offer an extended warranty when the tools* are registered within 28 days of purchase. Register your products for extended 3 year warranty here https://www.makitauk.com/service-web-login.html *Excludes the following - Batteries, Chargers, Accessories, Petrol Products, Production Tools/Air Tools, Gas Nailers, Compressors and non CE marked tools. You will need to create an account and upload your tools serial number to complete registration. In the unlikely event that your Makita tool develops a fault which is due to defective workmanship or materials, you should contact your nearest local Makita Service Agent for inspection. Locations of service agents can be found here https://www.makitauk.com/dealer-locator.html Or you can arrange free collection and inspection direct with Makita. Please find the Returns Form here https://www.makitauk.com/returns-form.html or call our Makita Service Centre 01908 211678. This warranty does not apply when Repairs have been made or attempted by unauthorised repairers. Repairs are required because of normal wear and tear. The tool has been abused, misused or improperly maintained. Alterations have been made to the tool. Please note you will be required to provide proof of purchase. This guarantee does not affect your statutory rights.