MAKITA DLX2372TJ 18V LXT TWIN KIT 2 X 5.0AH
ECA Expert Says...
Comes with DTW300 Impact Wrench & DHR242 SDS+ Hammer Drill, 2 x 5.0Ah Batteries, DC18RC Rapid Charger & MakPac Type 4 Connector Case
Makita DLX2372TJ 18v LXT Twin Kit
Comes with DTW300 Impact Wrench & DHR242 SDS+ Hammer Drill, 2 x 5.0Ah Batteries, DC18RC Rapid Charger & MakPac Type 4 Connector Case
Makita DHR242 24mm SDS+ Plus Rotary Hammer Drill
FEATURES:
Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200
One touch slide chuck for SDS-plus bit
Easy-to-grip handle
Ergonomically designed to give maximum power thrust
Provides a sure and comfortable grip in any operation
3 mode operation: Rotation + Hammering, Hammering only & Rotation only
The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are jointed with vibration absorbing cushion rubbers
High productivity achieved by using efficient Brushless DC motor to reduce energy loss by 30% giving longer run times between battery charges
SPECIFICATIONS:
Max in Steel: 13 mm
Max in Wood: 27 mm
Max in Concrete: 24 mm
No Load Speed: 0-950 rpm
Blows per Minute: 0-4,700 bpm
Single Impact Energy: 2.0J
Vibration: 15/sec2
Charging Time: Approx 22 min
Net Weight: 3.3 kg
Makita DTW300 LXT 1/2" Impact Wrench
FEATURES:
Efficient BL™ Brushless Motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
3 forward and 3 reverse Auto-Stop modes for increased efficiency
4 Stage power selection for optimum rpm and fastening torque
330 Nm of Max Torque and 580 Nm of Nut-Busting Torque
XPT technology that protects against dust & moisture
LED Job light with pre-glow and after-glow functions
Compact and ergonomic design at only 144 mm long
Rubberised soft grip provides increased comfort on the job
Equipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating
SPECIFICATIONS:
Voltage: 18v LXT
Driving Shank: 1/2" Square
Max. Fastening Torque: 330 Nm
Nut Busting Torque: 580 Nm
Blows per Minute (Hi): 0 - 3400 ipm
Blows per Minute (Med): 0 - 2600 ipm
Blows per Minute (Lo): 0 - 1800 ipm
Standard Bolt: M10 - M20
High Tensile Bolt: M10 - M16
No Load Speed (Max): 0 - 3200 rpm
No Load Speed (Hard): 0 - 2600 rpm
No Load Speed (Med): 0 - 1800 rpm
No Load Speed (Soft): 0 - 1000 rpm
Net Weight: 1.5 - 1.8 kg
COMES WITH:
1 x DHR242 SDS+ Rotary Hammer Drill
1 x DHR242 Side Handle
1 x DHR242 Depth Stop
1 x DTW300 Impact Wrench
1 x Belt Clip
1 x DC18RC Charger
2 x BL1850B 5.0Ah Li-ion Batteries
1 x MakPac Connector Case Type 4
Makita tools come with a standard 12 month warranty from date of purchase. Makita offer an extended warranty when the tools* are registered within 28 days of purchase. Register your products for extended 3 year warranty here https://www.makitauk.com/service-web-login.html *Excludes the following - Batteries, Chargers, Accessories, Petrol Products, Production Tools/Air Tools, Gas Nailers, Compressors and non CE marked tools. You will need to create an account and upload your tools serial number to complete registration. In the unlikely event that your Makita tool develops a fault which is due to defective workmanship or materials, you should contact your nearest local Makita Service Agent for inspection. Locations of service agents can be found here https://www.makitauk.com/dealer-locator.html Or you can arrange free collection and inspection direct with Makita. Please find the Returns Form here https://www.makitauk.com/returns-form.html or call our Makita Service Centre 01908 211678. This warranty does not apply when Repairs have been made or attempted by unauthorised repairers. Repairs are required because of normal wear and tear. The tool has been abused, misused or improperly maintained. Alterations have been made to the tool. Please note you will be required to provide proof of purchase. This guarantee does not affect your statutory rights.
Delivery Methods
We use DPD for the majority of our deliveries. We aim to despatch 'IN STOCK' orders from our Coventry branch by 4pm using DPD next day delivery service which means your order should arrive next working day. Please note if your product is in stock at one of our other branches (Not Coventry) then these orders may take 2-5 days for delivery. Delivery is FREE on orders over 75.00 ex VAT.
We currently only deliver to Mainland UK, excluding Highands and Islands.
To track your parcel please go to https://track.dpd.co.uk or alternatively download the DPD app here: https://www.dpd.com/nl/en/mydpd-app/
