£503.99 £419.99

ECA Expert Says...

The brand new plunge saw in the M18 range

Equivalent power of an AC model

Guide Rail Compatible

The Milwaukee M18FPS55-0P FUEL Body Only Plunge Saw delivers the power to rip cut at the same feed rate of an equivalent AC circular saw - with the ability to cut 45 metres of 18 mm plywood on one 5.5 Ah battery charge (Not included).
It has a depth adjustment with two scales, one for on a rail and one for off the rail, this can easily be adjusted by the press of a button.
Flat-sided upper guard, the blade is only 12 mm from the outer edge of the guard allowing the saw to cut very close to a wall.
This saw has also been designed for optimal dust extraction on the job site, due to the enclosed guard.
It is compatible with the DEK26 system and is also supplied with a dust bag. Comes with a 165mm Blade and a PACKOUT XL Toolbox.

No batteries or charger included


Scoring stop allows a 1 mm back cut to made minimising any splintering in laminated materials
The bevel adjustment has stops at 22.5°, 45°and 48°. It also has a -1 for making a back cut
The saw also has a cut line window on the side for those cuts where you need to see the front of the blade against the material and also a sprung loaded riving knife
Easy blade change system locks the switch off and the blade in position while the blade can be changed
Retractable riving knife allows the riving knife to stay in position even when making plunge cuts
Variable speed from 2500 rpm to 5600 rpm
The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
Flexible battery system: works with all MILWAUKEE M18 batteries


Blade Diameter: 165mm
Bore Size: 20mm
Bevel Capacity: -1 - 48°
Max. Cutting Depth: 59 mm
Max. Cutting Depth with Guide Rail: 55mm
Max. Cutting Depth with Guide Rail 0°/45°/48°: 55/ 42mm
Max. Cutting Depth with Guide Rail 45°: 42mm

Delivery Methods

We use Parcelforce for the majority of our deliveries. We aim to despatch 'IN STOCK' orders from our Coventry branch by 4pm using Pareclforce Express 24 delivery service which means your order should arrive next working day. Please note if your product is in stock at one of our other branches (Not Coventry) then these orders may take 2-5 days for delivery. Delivery is FREE on orders over 75.00 ex VAT.

We currently only deliver to Mainland UK, excluding Highands and Islands. A signature is required for all deliveries.

Where an item has an extended delivery time, this will be clear on the individual product page Parcelforce will let you know either by SMS or email that they have your parcel and will also give you an approximate time of delivery. Not going to be in? No problem. You will be able to reply to the Parcelforce notification where you can change delivery date, deliver to a neighbour or take to your local post office for collection. Want to track your order? - Please use this link As soon as your order is dispatched we will notify you by e-mail. If it is not possible to dispatch your order within the allotted time period or if for any reason it is not possible to fulfil your order we will inform you by email.


Milwaukee tools come with a standard 12 month warranty from date of purchase.

Milwaukee offer an extended warranty when the tools* are registered within 28 days of purchase.

Register your products for extended 3 year warranty here

*Excludes the following - M28 rechargeable battery packs, Batteries, Chargers & Accessories.

You will need to create an account and upload your tools serial number to complete registration.

Full terms and conditions can be found here

In the unlikely event that your Milwaukee tool develops a fault which is due to defective workmanship or materials,

you should contact the Milwaukee service centre on 0800 389 0305 or complete the E-Service repair form here

Local service centre locations can be found here

This warranty does not apply when

Repairs have been made or attempted by unauthorised repairers.

Repairs are required because of normal wear and tear.

The tool has been abused, misused or improperly maintained.

Alterations have been made to the tool.

Please note you will be required to provide proof of purchase.

This guarantee does not affect your statutory rights.